BMR 13-15 Chevrolet Camaro Front & Rear Hollow 29mm Adj. – SB039H

Description

• About Product
• Additional Details
• About the Brand
• Vehicle Fitment
• Product Videos

BMR 13-15 Chevrolet Camaro Front & Rear Hollow 29mm Adj. Sway Bar Kit w/ Bushings – Black Hammertone

The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB039 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB039 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!FRONTHole 1 (Boot-Leg end of bracket)98% stiffer than OE barHole 2 (Center)146% stiffer than OE barHole 3 (Flat end of bracket)214% stiffer than OE barREAROE SS bar (FE4)-Hole number 1 provides just over 100% increase in rate over the factory FE4 bar-Hole number 2 is 150%-Hole number 3 is 200%OE ZL1 bar (FE5)-Hole number 1 provides just over 25% increase in rate over the factory FE4 bar-Hole number 2 is 40%-Hole number 3 is 75%FITMENT NOTE: SB033 IS DESIGNED AS A DIRECT REPLACEMENT FOR FE4 REAR SUSPENSION SYSTEMS, WHERE THE SWAY BAR END LINKS ARE LOCATED OUTBOARD OF THE REAR SHOCKS. THIS INCLUDES 2012+ ZL1 AND 2013+ SS. 2010-2012 SS MAY UPGRADE TO THIS FE4 BAR IF REAR LOWER CONTROL ARMS AND REAR SWAY BAR END LINKS ARE UPGRADED TO FE4 SPEC. SB033 WILL NOT FIT ON V6 APPLICATION DUE TO INTERFERENCE WITH REAR V6 BRAKE CALIPERS.WILL NOT FIT A CONVERTIBLE.

BMR Suspension designed the SB039 sway bar kit for street performance, autocross, and road race applications.

Fits 2013-newer Chevrolet Camaro SS, 2012-newer ZL1;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;98%-214% increase (front), 25%-200% increase (rear) in sway bar rate;Cold formed to better resist torsional fatigue;Manufactured from 29mm (front), and 32mm (rear) heavy-wall DOM tubing for increased strength;Three-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushing;Zinc-plated inner sleeves;Durable powdercoat finish;3-4 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.. BMR 13-15 Chevrolet Camaro Front & Rear Hollow 29mm Adj. Sway Bar Kit w/ Bushings – Black Hammertone. Sway Bar Kit With Bushings, Front (SB038) And Rear (SB033). Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit. BMR Suspension – SB039H. Sway Bar Kit

Suspension components are key to making sure your car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

Sway bars are designed to decrease the amount of body roll on your vehicle. By upgrading your sway bar to an aftermarket sway bar, you can increase the cornering performance of your vehicle at higher speeds.

Warning: This product listing contains generic images

About BMR Suspension

When BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price. BMR turned this market void into a business philosophy, and has been serving our customer’s needs ever since. Currently offering chassis, suspension, and drivetrain products for 22 different vehicles, BMR is the leading suspension manufacturer in many of the market segments that it serves.Whether you are interested in street performance, hardcore drag racing, or handling applications, BMR Suspension has the products that you need. Proudly made in the U.S.A. in a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR’s in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process.BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR’s current project vehicles include a 2016 Camaro, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS,a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR’s customer service, design innovation, and manufacturing quality.By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. When performance is a must, rely on BMR Suspension!

Vehicle Fitment

• 2013 Chevrolet Camaro LS
• 2013 Chevrolet Camaro LT
• 2013 Chevrolet Camaro SS
• 2013 Chevrolet Camaro ZL1
• 2014 Chevrolet Camaro LS
• 2014 Chevrolet Camaro LT
• 2014 Chevrolet Camaro SS
• 2014 Chevrolet Camaro ZL1
• 2014 Chevrolet Camaro Z/28 ( door , HP Cylinder L, speed )
• 2015 Chevrolet Camaro LS
• 2015 Chevrolet Camaro LT
• 2015 Chevrolet Camaro SS
• 2015 Chevrolet Camaro Z/28 ( door , HP Cylinder L, speed )
• 2015 Chevrolet Camaro ZL1

Show MoreProduct Videos