Ford Racing 2021 Bronco 17×8.0 Beadlock Carbonized Gray Badlands Wheel – M-1007-DC17B

Description

• About Product
• Product Videos

Ford Racing 2021 Bronco 17×8.0 Beadlock Carbonized Gray Badlands Wheel Kit

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

Wheel; 17 in. Gloss Black Bead Lock Capable Wheel;

Ford Racing 2021 Bronco 17×8.0 Beadlock Carbonized Gray Badlands Wheel Kit. Thread Size M14 x 1.5 RH in.. Requires Open End Lug Nuts. Wheel Stud Style Press-In. Knurl Diameter 0.625 in.. Underhead Length 3/4 in.. w/Extended ARP Studs. Wheel -Aluminum. Made in the USA. Wheel

Keep your ride looking good with a new set of wheels from some of the top brands that we carry.

Replacing the factory wheels on your vehicle with a set of cast wheels is a great modification to make. In fact, we recommend wheel upgrades as one of the first modifications to any project car. Cast wheels are a great modification to any project car because they are lightweight, durable, and provide a significant improvement in style over OEM wheels. If you are looking for an affordable set of wheels that are proven to enhance the style and performance of your ride, look no further than a new set of cast wheels.

Product Videos